Energy Star Ductless Mini Split Air Conditioner HEAT Pump : 18-25 SEER

Description

Ductless Mini Split AC: 18 - 22.5 SEER
DC Inverter with Heat Pump
Choose required capacity and lineset length within our T3 series Thermocore Energy Star Certified Mini Split-Heat Pumps to accomodate any size space. Available Options from 9000 BTU for areas up to 400 sq. ft. to 30000 BTU for 1500 sq. ft. areas. I-Feel control, and comes fully charged with R410A. Installation kit includes copper lineset, electrical wire. Choose desired length upto 50ft. Low ambient operation for both cool/heat down to -13F for 9/12k units. 5F for larger sizes. Full 1yr Part / 5yr Compressor Warranty.
Technical Data:
System Includes:
9,000 > 30,000 BTU
INVERTER
Cooling Capacity
9,000 > 30,000 BTU INVERTER Heat Pump
18 > 22.5 SEER - 9.6 > 10.5 HSPF / ENERGY STAR Certified
*
Pre-Charged with ECO-Friendly R410A
1 Year Parts - 5 Year Compressor Warranty
Indoor Unit - Air Handler.
Outdoor Unit - Compressor.
Digital LCD Remote Control with Follow Me.
Installation Kit with 15ft of lineset
and wire.
Product and Installation Manual.
Top Line Features:
Options:
9000, 12000, 18000, 24000, 30000 BTU
AHRI and ENERGY STAR Certified
Top HVAC Brand: THERMOCORE SYSTEMS
INCLUDES Toshiba-GMCC compressor
Pre-Charged w/ Eco-friendly R410A Refrigerant
I-Feel / Follow Me Technology Tracks Remote Location
Cross Flow Technology reduces noise output
Complete Install Kit: Lineset, Indoor Wire
Compatible with over 5 filtration medias
1 Year Part - 5 Year Compressor Warranty
Install Kit Contents:
15 Ft Flared Copper Tubing
15 Ft Pipe Insulation
15 Ft Electrical Wire - INDOOR>OUTDOOR
Drain Pipe (indoor)
Digital LCD remote Control
Wall Bracket for Indoor Unit
Installation and User Manual
Extend included 15 foot copper lineset to 25-30-40-50 feet. Just .50 / ft
contact us for details >
WHAT IS DC INVERTER?
DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.
Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained.
BASIC OVERVIEW:
The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC.
Click for Installation Manual.
*Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split*
Click for Installation Tip.
It is highly advised a certified HVAC technician complete installation to be eligible for warranty.
See warranty details below >
*5 Year Compressor - 1 Year on all other Parts*
Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns.Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 2 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out.
SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS!
Our Thermocore systems ship via
FEDEX
Ground for 9000-12000 BTU systems and LTL for 18000-30000 BTU systems. These depart out of Warren, Michigan and will arrive in two seperate boxes. Transit time is usually between 4 to 5 business days from payment receipt depending on where you are geographically located. We do not require signature upon delivery for these shipments and somebody must be on site. We will ship to Canadian locations but please be advised of additional import brokerage charges that may be entailed when shipment crosses border. please contact our offices if interested in a local pickup.
Condenser Ground Stand
- Provides Flat even surface
- Avoids debris obstruction
Price:
.00
Click for more Info
Lineset Extension
- Extend included 15 ft copper lineset to 25ft - 30ft - 40ft - 50ft
Price:
.00 > 4.00
Click for more Info
Condenser Bracket
- Mount your condenser at any height on an outdoor sidewall
Price:
.00
Click for more Info
Micro-Pump II
- Required when mounting air handler on Interior wall
Price:
9.00
Click for more Info
Electrical Wire Harness
- 16/4 Electrical Wire Harness
- For Extending Evap. Length
Price:
.15 / ft
Click for more Info
Additional Remote Controls
- Spare remote controls for the T1 Series Ductless System
Price:
.00
Click for more Info
Filter Medias
- Inserts into Filter Screen Slot
- Choice of 4 Filtration Medias
Price:
.00 - .00
Click for more Info
Wired Thermostat
- Permanently Hard Mounts
- Controls Settings w/ Remote
Price:
.00
Click for more Info
View the Mini Split FAQ >
View the Mini Split Outline Diagram >
Click to contact us >