BBV Rotary Evaporator 30L

Description

M: RE-3002, SN: 18124175
30L rotoary evaporator, discontinued in this size
Best Value Vacs brings you a 30L Rotary Evaporator designed to remove solvents from your extractions. This Best Value Vacs evaporator will clean extractions of solvents in a flash. Features digital temperature control and max rotation speed of 180 RPM.
Features and Specifications
Glass Material: GG-17 High Borosilicate Glass
Weight (lbs)
165
Shelf Material: Aluminum Alloy
Dimensions
33L x 55W x 84H
Pot Material: Stainless Steel, Fully sealing and heating
Voltage
120v
Rotary Bottle Capacity: 30L
Collection Bottle Capacity: 10L
Rotary Power: 180w (110v/60hz)
Rotary Speed: 0-180RPM
Heating Power: 8KW (220v/60hz)
Bath Temperature Control Range: 0-99c
Digital Temperature Control
Temperature Control Accuracy: +/-1C
Lifting Mechanism: Electric
Dimensions Assembled (LxWxH in.): 33x55x84
Weight: 165 LBS
Includes: PTFE Injection Tube
Does not include: Circulating chiller for condensing column.
Requires Assembly
RE-3002 rotary evaporator’s rotary bottle maximum capacity is 30L, receiving bottle’s maximum capacity is 20L, rotate speed is 0-90r.p.m, motor power is 250W. RE-3002 rotary evaporator(evaporating bottle volume>10L) is equipped with double condenser(main and vice condenser), which has better condensation effect and higher recovery rate. Because this rotary evaporator works under vacuum condition, and contact segment all adopt high temperature resistance material-high borosilicate glass and PTFE material, it is especially suitable for heat reactive material and material which is corrosive to stainless steel’s concentration, crystallization, separation and solvent recovery.
The rotary evaporator has advantages of large contact area, high evaporation efficient, easy to handle, low noise, good sealing performance, complete in specifications and can manage easily foam material. It already has various specification products: 2L, 3L, 5L, 10L, 20L, 30L, 50L, 100L and so on, and the 100L rotary evaporator is an exclusive research and developed large-size rotary evaporator of our company, designed for the purpose of mass production need.
RE-3002 rotary evaporator has following features:
Rotating body is composed of a reliable three-phase asynchronous motor and a transducer control device;
Double sealed by PTFE and fluorine rubber sealing ring to keep high vacuum degree, separate gas and liquid and maintain no backflow;
Adopt main and vice efficient condenser, there has automatic switching device between vice condenser and receiving bottle. Below receiving bottle, equipping with tapping valve, which makes it convenient to recycle solvent and the recovery rate approach to 100%;
Rotary bottle is connected by nut, that is easy to install and dismount;
Continuously charging and recycling material;
Vacuum system is equipped with vacuum meter, choose best working vacuum degree to low boiling point materials;
Heating kettle is applicable for both water and oil, digital thermostat control and manual up and down, closed resistance wire heater, temperature control by K type transducer. Besides, heating groove can move left and right;
Has the function of dry burning resistant protection and safe temperature loop;
Smooth starting, can positive and negative inversion operate;
Durable design, can choose plate bursting disk glass component as needed.
Rotary evaporator, also called rotavap or rotovap, is a commonly used lab instrument in chemistry laboratory, mainly used in continuous distillation of a large amount of volatile solvent under negative pressure. Especially for the concentration of extract liquor and distillation of receive liquid when chromatograph. Because evaporator is vacuumized, to be distilled solvent’s boiling point depressed. In general, ingredient which is distilled form sample is the target ingredient in chemical research, such as extracting some natural ingredient from organic synthesis sample. Rotary evaporator mostly is used for isolating low-boiling ingredient, such as hexane, ethyl acetate, that presenting liquid state under indoor temperature and normal pressure. Besides, it can dislodge some ingredient in sample by standard operation.
NO REFUNDS- as in working condition last